GLASS FLAKE/FABRIC REINFORCED LINING

Glass flake/mortar & glass fabric reinforced resin based linings. They are available in furan, polyester, vinylester, epoxy resin bases for lining from 1.5mm - 3mm thick on m.s & concrete surface for vessel lining, foundation lining, tower lining etc. They have concrete or steel substrates. They are suitable for use in U.S.D.A inspected facilities.

SERIES	FEATURES	USES	APPLICATION METHOD
100 Chempruf 100 Series: The base[base coat 10 to 30 mils] and top [top coat 10 to 30 mils] coat layers are reinforced with fiberglass flakes.	Flake Glass Reinforce Hi-Build Coatings Durable Coatings Good Abrasion Resistance to Foot Traffic. Typical System Thickness 20 to 60 mils.	Interior & Exterior Tanks Floors & Walls Clarifiers Containment Dikes Structural Steel	or or
1000 Chempruf 1000 Series: The base[base coat 30 to 50 mils] and top [top coat 30 to 50 mils] coat layers are reinforced with fiberglass flakes	Fiberglass Flake Reinforced, Trowel Applied Lining Designed for continual or Frequent Chemical Immersion Service. Finished Systems are Typically 60 to 100 mils. Chempruf 1310 is suitable for use in F.D.A & U.S.D.A inspected facilities.	Storage Tanks Scrubbers & Absorbes. Clarifiers Trenchers & Sumps Containment Dikes Process Vessels Floors & Walls	Primer Base Coat 30 to 50 mils Top Coat 30 to 50 mils
2000 Chempruf 2000 Series: The base[Primer: Basecoat(1/16") 1.5 oz.Fiberglass mat & Saturant. 1.5 oz.Fiberglass mat & Saturant. 10 mil Surface mat and Saturant.] coat is reinforced with three layers of fiberglass mat.	Multiple Layers of Fiberglass. Reinforced Lining. Designed for the most demanding chemical immersion service. Resists substrate flexing or movement. Finished systems are typically 1/8" Chempruf 2310 is suitable or use in F.D.A & U.S.D.A inspected facilities.	Containment Dikes Scrubbers & Absorbes. Clarifiers Trenchers & Sumps.	Primer Base Coat 1/16" Saturant Over Mat Saturant Over Mat Saturant Over Mat
2001 Chempruf 2001 Series: The base [Primer Base coat (1/6") 10oz.Fiberglass Fabric & Saturant Top Coat (1/16")] coat layers are reinforced with fiberglass fabric.	Flake Glass Reinforced Lining. Designed for server frequent chemical immersion service. Resists substrate flexing or movement Fininshed systems are typically 1/8" Chempruf 2311 is suitable or use in F.D.A & U.S.D.A inspected facilities. AR Series for abrasive environments.	Containment Dikes Scrubbers & Absorbes. Clarifiers Trenchers & Sumps	Primer Base Coat 1/16" Saturant Over Fabric Top Coat 1/16"

Top